Technical data

BLADEOS 6.3 Command Reference
206
 Chapter 4: Configuration Commands BMD00186-B, April 2010
System Host Log Configuration
Table 107 Host Log Configuration Commands
Command Syntax and Usage
[no] logging host <1-2> address <IP address>
Sets the IP address of the first or second syslog host.
Command mode: Global configuration
logging host <1-2> severity <0-7>
This option sets the severity level of the first or second syslog host displayed. The default is 7,
which means log all severity levels.
Command mode: Global configuration
logging host <1-2> facility <0-7>
This option sets the facility level of the first or second syslog host displayed. The default is 0.
Command mode: Global configuration
logging console
Enables delivering syslog messages to the console. It is enabled by default.
Command mode: Global configuration
no logging console
Disables delivering syslog messages to the console. When necessary, disabling console
ensures the switch is not affected by syslog messages. It is enabled by default.
Command mode: Global configuration
[no] logging log [<feature>]
Displays a list of features for which syslog messages can be generated. You can choose to
enable/disable specific features (such as vlans, stg, or ssh), or enable/disable syslog on
all available features.
Command mode: Global configuration
show logging
Displays the current syslog settings.
Command mode: All