Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 205
System Error Disable and Recovery Configuration
The Error Disable and Recovery feature allows the switch to automatically disable a port if an error
condition is detected on the port. The port remains in the error-disabled state until it is re-enabled
manually, or re-enabled automatically by the switch after a timeout period has elapsed. The
error-disabled state of a port does not persist across a system reboot.
Table 106 Error Disable Configuration Commands
Command Syntax and Usage
errdisable timeout <30 - 86400>
Configures the error-recovery timeout, in seconds. After the timer expires, the switch
attempts to re-enable the port. The default value is 300.
Note: When you change the timeout value, all current error-recovery timers are reset.
Command mode: Global configuration
errdisable recovery
Globally enables automatic error-recovery for error-disabled ports. The default setting is
disabled.
Note: Each port must have error-recovery enabled to participate in automatic error recovery.
Command mode: Global configuration
no errdisable recovery
Globally disables error-recovery for error-disabled ports.
Command mode: Global configuration
show errdisable
Displays the current system Error Disable configuration.
Command mode: All