Technical data

BLADEOS 6.3 Command Reference
204
 Chapter 4: Configuration Commands BMD00186-B, April 2010
[no] banner <1-80 characters>
Configures a login banner of up to 80 characters. When a user or administrator logs into the
switch, the login banner is displayed. It is also displayed as part of the output from the
show sys-info command.
Command mode: Global configuration
[no] hostname <character string>
Enables or disables displaying of the host name (system administrator’s name) in the
Command Line Interface (CLI).
Command mode: Global configuration
[no] system bootp
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default setting is enabled.
Command mode: Global configuration
[no] system dhcp {mgta|mgtb}
Enables or disables Dynamic Host Control Protocol for setting the IP address on the selected
interface. When enabled, the IP address obtained from the DHCP server overrides the static
IP address. The default setting is enabled.
Command mode: Global configuration
[no] system reset-control
Enables or disables the reset control flag. When enabled, the switch continues to function
after a crash of the main processor, using the last known Layer 2/3 information.
Command mode: Global configuration
[no] system packet-logging
Enables or disables logging of packets that come to the CPU. The default setting is
enabled.
Command mode: Global configuration
show system
Displays the current system parameters.
Command mode: All
Table 105 System Configuration Commands
Command Syntax and Usage