Technical data

BLADEOS 6.3 Command Reference
136
 Chapter 2: Information Commands BMD00186-B, April 2010
The following command displays FIP Snooping information for the selected port:
show fcoe fips port <port alias or number> information
Command mode: All
FIP Snooping port information includes the following:
 Fiber Channel Forwarding (FCF) mode
 Number of FCF links connected to the port
 List of FIP Snooping ACLs assigned to the port
Information Dump
The following command dumps switch information:
show information-dump
Command mode:
All
Use the dump command to dump all switch information available (10K or more, depending on your
configuration). This data is useful for tuning and debugging switch performance.
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
FIP Snooping on port INT2:
This port has been configured to automatically detect FCF.
It has currently detected to have 0 FCF connecting to it.
FIPS ACLs configured on this port:
SMAC 00:c0:dd:13:9b:6f, action deny.
SMAC 00:c0:dd:13:9b:70, action deny.
SMAC 00:c0:dd:13:9b:6d, action deny.
SMAC 00:c0:dd:13:9b:6e, action deny.
DMAC 00:c0:dd:13:9b:6f, ethertype 0x8914, action permit.
DMAC 00:c0:dd:13:9b:70, ethertype 0x8914, action permit.
DMAC 00:c0:dd:13:9b:6d, ethertype 0x8914, action permit.
DMAC 00:c0:dd:13:9b:6e, ethertype 0x8914, action permit.
SMAC 0e:fc:00:01:0a:00, DMAC 00:c0:dd:13:9b:6d, ethertype 0x8906, vlan
1002, action permit.
DMAC 01:10:18:01:00:01, Ethertype 0x8914, action permit.
DMAC 01:10:18:01:00:02, Ethertype 0x8914, action permit.
Ethertype 0x8914, action deny.
Ethertype 0x8906, action deny.
SMAC 0e:fc:00:00:00:00, SMAC mask ff:ff:ff:00:00:00, action deny.