Technical data

BLADEOS 6.3 Command Reference
128
 Chapter 2: Information Commands BMD00186-B, April 2010
DCBX Feature Information
The following command displays DCBX Feature information:
show cee information dcbx port <port alias or number> feature
Command mode:
All
The following table describes the DCBX Feature information.
DCBX Port Feature State-machine Info
====================================
Alias Port Type AdmState Will Advrt OpVer MxVer PrWill SeqNo Err OperMode Syncd
----- ---- ------- -------- ---- ----- ----- ----- ------ ----- --- -------- ---
1 1 ETS enabled No Yes 0 0 No 0 No disabled No
2 2 ETS enabled No Yes 0 0 Yes 4 No enabled Yes
3 3 ETS enabled No Yes 0 0 No 0 No disabled No
4 4 ETS enabled No Yes 0 0 Yes 1 No enabled Yes
5 5 ETS enabled No Yes 0 0 Yes 1 No enabled Yes
6 6 ETS disabled No Yes 0 0 No 0 No disabled No
7 7 ETS disabled No Yes 0 0 No 0 No disabled No
8 8 ETS disabled No Yes 0 0 No 0 No disabled No
9 9 ETS disabled No Yes 0 0 No 0 No disabled No
10 10 ETS enabled No Yes 0 0 No 0 No disabled No
...
Table 60 DCBX Feature Information Fields
Parameter Description
Alias Displays each port’s alias.
Port Displays each port’s number.
Type Feature type
AdmState Feature status (Enabled or Disabled)
Will Willing flag status (Yes/True or No/Untrue)
Advrt Advertisement flag status (Yes/True or No/Untrue)
OpVer Operating version negotiated with the peer device
MxVer Maximum operating version supported by the system
PrWill Peer’s Willing flag status (Yes/True or No/Untrue)
SeqNo Sequence number that changes each time a DCBX parameter in one or
more DCB feature TLVs changes
Err Error condition flag (Yes or No). Yes indicates that an error occurred
during the exchange od configuration data with the peer.