Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 2: Information Commands
 117
Link Status Information
The following command displays link information:
show interface link
Command mode: All except User EXEC
Use this command to display link status information about each port on the
G8124, including:
 Port alias and port number
 Port speed and Duplex mode (half, full, any)
 Flow control for transmit and receive (no, yes, or both)
 Link status (up, down, or disabled)
Alias Port Speed Duplex Flow Ctrl Link
----- ---- ----- -------- --TX-----RX-- ------
1 1 10000 full yes yes up
2 2 10000 full yes yes up
3 3 10000 full yes yes up
4 4 10000 full yes yes up
5 5 10000 full yes yes down
6 6 10000 full yes yes up
7 7 10000 full yes yes up
8 8 10000 full yes yes up
9 9 10000 full yes yes down
10 10 10000 full yes yes up
11 11 10000 full yes yes up
12 12 10000 full yes yes up
13 13 10000 full yes yes up
14 14 10000 full yes yes up
15 15 10000 full yes yes down
16 16 10000 full yes yes up
17 17 10000 full yes yes up
18 18 10000 full yes yes up
19 19 10000 full yes yes up
20 20 10000 full yes yes down
21 21 10000 full yes yes up
22 22 10000 full yes yes up
23 23 10000 full yes yes up
24 24 10000 full yes yes up
MGTA 25 100 full yes yes up
MGTB 26 10 half yes yes down