Technical data

BLADEOS 6.3 Command Reference
116
 Chapter 2: Information Commands BMD00186-B, April 2010
RMON Event Information
The following command displays RMON Alarm information:
show rmon event
Command mode:
All
The following table describes the RMON Event Information parameters.
RMON Event group configuration:
Index Type Last Sent Description
----- ---- ---------------- ---------------------------------
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
Index Owner
----- ---------------------------------------------
1 dan
Table 54 RMON Event Parameter Descriptions
Parameter Description
Index Displays the index number that identifies each event instance.
Type Displays the type of notification provided for this event, as follows: none,
log, trap, both.
Last sent Displays the time that passed since the last switch reboot, when the most
recent event was triggered. This value is cleared when the switch reboots.
Description Displays a text description of the event.
Owner Displays the owner of the alarm instance.