Technical data

BLADEOS 6.3 Command Reference
110
 Chapter 2: Information Commands BMD00186-B, April 2010
Access Control List Information Commands
Access Control List Information
The following command displays Access Control List (ACL) information:
show access-control list <ACL number>
Command mode:
All
Table 49 ACL information commands
Command Syntax and Usage
show access-control list <ACL number>
Displays ACL list information. For details, see page 110.
Command mode: All
Current ACL List information:
------------------------
Filter 1 profile:
Ethernet
- SMAC : 00:00:aa:aa:01:fe/ff:ff:ff:ff:ff:ff
- DMAC : 00:0d:60:9c:ec:d5/ff:ff:ff:ff:ff:ff
- VID : 10/0xfff
- Ethertype : IP (0x0800)
- Priority : 3
Meter
- Set to disabled
- Set committed rate : 64
- Set max burst size : 32
Re-Mark
- Set use of TOS precedence to disabled
Packet Format
- Ethernet format : None
- Tagging format : Any
- IP format : None
Actions : Deny
Statistics : enabled
Mirror Target Configuration:
Mirror target destination: port
Egress port for mirror target: 4