Technical data

BLADEOS 6.3 Command Reference
100
 Chapter 2: Information Commands BMD00186-B, April 2010
IP Information
The following command displays Layer 3 information:
show layer3 information
Command mode:
All
IP information includes:
 IP interface information: Interface number, IP address, subnet mask, broadcast address, VLAN
number, and operational status.
 Default gateway information: Metric for selecting which configured gateway to use, gateway
number, IP address, and health status
 BootP relay settings
 IP forwarding settings, including the forwarding status of directed broadcasts, and the status of
ICMP re-directs
 Network filter settings
 Route map settings
IP information:
AS number 0
Interface information:
1: 10.200.30.3 255.255.0.0 10.200.255.255, vlan 1, up
2: IP6 10:90:90:0:0:0:0:91/64 , vlan 4094, up
fe80::222:ff:fe7d:717e
Default gateway information: metric strict
1: 10.200.1.1, vlan any, up
Default IP6 gateway information:
Current BOOTP relay settings: OFF
Current primary BOOTP server: 0.0.0.0
Current secondary BOOTP server: 0.0.0.0
Current IP forwarding settings: ON, dirbr disabled, noicmprd disabled
Current network filter settings:
none
Current route map settings: