User Manual

ManualsBrandsBlackVue ManualsCar Accessories4K UHD Cloud Dashcam 64GB

Table Of Contents

Introduction
Important safety information
Overview
- In the box
  - At a glance
Installation
- Installing the BlackVue dashcam
Playing and Managing Videos
- Playing and managing video files using your smartphone (Android/iOS)
- Playing and managing video files using your computer (Windows/macOS)
Tips for optimal performance
- Formatting the microSD card
  - Format using BlackVue Viewer (Windows)
  - Format using BlackVue Viewer (macOS)
- Upgrading the firmware
  - Upgrading the firmware using an iOS or Android device (Firmware Over The Air)
  - Upgrading the firmware using a computer (Windows/macOS)
Changing settings
- Changing settings using your smartphone (Android/iOS)
- Changing settings using your computer (Windows/macOS)
  - BlackVue Viewer settings
  - Firmware settings
    - Basic settings
      - Time settings
      - Video settings
Optional accessories
Troubleshooting
- Changing / resetting Wi-Fi Direct SSID and password
  - Change Wi-Fi SSID and password over the Cloud
  - Change the Wi-Fi password using BlackVue Viewer (Windows/macOS)
Product specifications
Recording time
Disposal and recycling information

DR900X-2CH

47

ENGLISH

9

Open the BlackVue app. Select WI-FI > > Firmware upgrade.

Note

y

The rmware version currently installed on the microSD card is shown rst. Below it, the rmware version you downloaded

in step 4 is shown.

10

Tap Upgrade to apply the rmware upgrade.

11

The dashcam's rmware will be upgraded – this may take a few minutes. The dashcam needs to reboot to complete the rmware

upgrade.

Caution

Please make sure the dashcam is powered on until normal recording starts after the upgrade is completed. Any power

interruption may prevent the rmware upgrade from completing, resulting in malfunction of the dashcam.