User Manual

Table Of Contents
44
BLACKVUE
9
Open the BlackVue app. Select WI-FI > > Firmware upgrade.
Note
y
The rmware version currently installed on the microSD card is shown rst. Below it, the rmware version you downloaded
in step 4 is shown.
10
Tap OK to apply the rmware upgrade.
11
The dashcam's rmware will be upgraded – this may take a few minutes. The dashcam needs to reboot to complete the rmware
upgrade.
Caution
Please make sure the dashcam is powered on until normal recording starts after the upgrade is completed. Any power
interruption may prevent the rmware upgrade from completing, resulting in malfunction of the dashcam.