User Manual
Table Of Contents
- Introduction
- Important safety information
- Overview
- Installation
- Playing and Managing Videos
- Playing and managing video files using your smartphone (Android/iOS)
- Playing and managing video files using your computer (Windows/macOS)
- Tips for optimal performance
- Changing settings
- Changing settings using your smartphone (Android/iOS)
- Changing settings using your computer (Windows/macOS)
- About the Cloud Service
- Optional accessories
- Troubleshooting
- Product specifications
- Recording time
- Disposal and recycling information
16
BLACKVUE
Note
y
Up to 50 event recordings (impact, manual) can be locked from being overwritten. By default, this feature is enabled. In the
rmware settings, you can choose to either overwrite them with new event les when the event le storage is full or lock the
50event les and save the new event les in loop recording storage. Please note that formatting the microSD card deletes all the
recordings including the locked event les.
y
The recording LED is on while recording (default setting) and the GPS LED is on when a GPS signal is received. There are
4recording modes: Normal, Event, Parking and Manual. The dashcam starts recording in normal mode, switches to event mode
when an impact is detected, and switches to parking mode when the vehicle is turned o (Hardwiring power cable, ACC+) or
stationary for 5 minutes (Cigarette lighter power cable, G-sensor).
y
When you run the dashcam for the rst time the rmware is automatically loaded onto the microSD card. After the rmware has
been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.