Operating Instructions and Installation Instructions

48
BLACKVUE
Time settings
If you do not connect the GPS receiver:
To manually set the time select Settings from the Quick Menu and press the Time button. Enter your date (year, month, day) by selecting
each eld and using the up/down buttons. Tap Set date to change to Set time and enter your time (hour, minute, second). Tap Exit and
save the settings.
If you connect the GPS receiver:
If you run the dashcam with the GPS receiver connected, it is possible to sync with GPS time. To sync with GPS time select Settings from
the Quick Menu and press the Time button. Tap the top right button (Set date) twice to get to GMT (Time zone).
Enter your GMT time zone by selecting the eld and using the up/down buttons.
Tap Daylight saving time to turn it on or o.