Operation Manual

40
BLACKVUE
If you do not connect the GPS receiver:
To manually set the time select Manual time setting and set your date and time.
If you connect the GPS receiver:
If you run the dashcam with the GPS receiver connected, it is possible to sync with GPS time. To sync with GPS time uncheck Manual time
setting and select your GMT time zone. The factory setting is GMT -11.
Some examples of GMT time osets are:
y
GMT-7: Los Angeles
y
GMT-4: New York
y
GMT+O: London
y
GMT+1: Paris
y
GMT+3: Moscow
y
GMT+8: Singapore
y
GMT+9: Seoul
y
GMT+10: Sydney
If you are unsure of your GMT oset please look up your city on https://qreenwichmeantime.com/
Selecting Daylight saving time will advance the clock by one hour.
Video
– Image quality
You can adjust the recording image quality (bit rate). Choose between:
y
Highest (Front: 11 Mbit/s, Rear: 11 Mbit/s)
y
High (Front: 9 Mbit/s, Rear: 9 Mbit/s)
y
Normal (Front: 7 Mbit/s, Rear: 7 Mbit/s)
Increasing the image quality will increase the size of the video les. Loading and copying time will increase accordingly.
– Night vision
Turning on night vision will brighten the image when recording in parking mode in low-light environments. Night vision is only active in
parking mode.