Operation Manual

3
Preparations
Safety Instructions
This manual is about what should be done to protect the user's safety and
prevent property damage.
Please make sure to read it thoroughly before using the product.
Do not disassemble, repair and/or alter the product.
This may cause a fire, an electric shock and/or malfunction. Contact the service
center if you need to have the product fixed. User may not be entitled to free
service if and when product malfunction is caused by user's fault.
Do not spray water on each parts of the product when cleaning it. Make
sure not to wet the product.
This may cause a fire, an electric shock and/or malfunction.
Do not spray a cleansing agent on the surface of the product.
This may cause discoloration and/or cracks on the surface and result in
malfunction.
Do not give the product a shock, and make sure foreign matter does not
enter the product.
This may result in malfunction.
Do not operate the product while driving.
This may cause a traffic accident because it distracts you from keeping your
eyes on the road. Use after stopping/parking your car in a safe place.
Do not install the product in a location where it may interrupt a safe driving
or block your view while driving.
This may cause a traffic accident.
Excessively dark tinting on the windshield may make recorded images look
blurry or distorted.
The optimum temperature for picture quality ranges from 0 to 50 °C. The
picture quality may vary according to seasons, especially in midsummer or
winter season.
This product is fitted with a camera. Drastic changes in brightness (on
entry/exit of tunnels), strong backlight in the daytime, and no light source at
midnight may result in defective recorded images.
If power supply to the device is interrupted by a crash or accident, it may
cause video not to be recorded.
BlackVue_Eng_0726.indd 3 2012-07-26 �� 4:00:45