Operation Manual

9
Install the BlackVue in the Car
1.
Turn off the ignition and pull out the car key.
Install the device in a bright and safe place.
2.
Insert the Micro SD Card into the BlackVue.
For instructions for use of Micro SD card,
please refer to page 8.
3.
Attach the BlackVue on the vehicle's window
using double-sided tape.
We recommend you install the device on the
backside of the rearview mirror so that the
BlackVue camera lens is at the center of the
vehicle.
Install the device in an area where it does not
block the driver's view.
Clean the area, on which a double-sided tape
will be put, with a dry cloth to remove any
foreign matter and moisture.
I f mo u nte d o n th e el e c t r i c a l l y h e a te d
windscreen, the product may cause damage
to the heating grid when demounted later.
If the mount of the BlackVue has come off,
see Page 11.
4.
Connect the BlackVue's [DC IN] connector
to the cigarette lighter receptacle using the
power cable.
When recording in the parking mode, you
are advised to connect the Power Magic, an
uninterrupted power supply (UPS) unit, to the
product.
If you intend to use the BlackVue along with
other car accessories using the cigarette
lighter receptacle, you are advised to use a
multi-socket outlet (cigar socket).




BlackVue_Eng_0726.indd 9 2012-07-26 �� 4:00:47