Operation Manual

34
Sensitivity Setting
In recording mode, the G-sensor sensitivity(impact sensitivity) and motion
detection sensitivity can be set for each start event recording. The speed alert
can be set to start event recording when vehicle exceeds the set speed level.
1
Click the
G
button and click the Sensitivity tab.
2
After changing the conguration, click Save & Close.
Note
y
For details about advanced sensitivity configuration, refer to
Advanced Sensitivity Settings. (36 Page)
1
2
3
No. Function Description
1
Sensitivity
for Normal
Rec
ording
It is possible to set the G-sensor sensitivity for event
recording when shock is applied. The G-sensor
sensitivity of top and bottom, left and right, front and
rear each can be set from 0-10 levels.
2
Sensitivity for
Parking Mode
It is possible to set the G-sensor and motion
detection sensitivity to start event recording during
parking recording mode. The G-sensor sensitivity of
top and bottom, left and right, front and rear each
can be set from 0-10 levels; and the motion detection
sensitivity can be set from 0-5 levels.