User Guide

12 BLACKVUE
DMS Calibration
Why do we need calibration?
To utilize AI-based DMS features, calibration process must be preceded to enable DMS.
The calibration process is intended to improve the accuracy of driver recognition since
driver's physical condition (height and eye size), driving position vary from person to
person.
Complete installation DMS camera and Front camera
Turn on the engine, DMS booting up
Adjust the camera angle if necessary to ensure the driver's head is within the
camera. (Please check your face through "Live view" via Wi-Fi direct or BlackVue
Cloud.)
When DMS calibration starts, Blue LED blinks for 30 secs to 2 mins.
When DMS calibration is completed, Green LED turns on.
When DMS is enabled, the device can recognize Driver’s behavior (Drowsy,
Distracted, Hand Distraction, Mask)
Windshield Installation Dashboard Installation
Note
y
During calibration process, the DMS camera is being recorded.
y
Every time DMS camera starts, calibration operates. and it can recalibrate
automatically while driving.