User Manual Smart Watch Brand: Blackview Model: X1 FCC ID:2AVWCX1 Shenzhen Xinhuajitong Technology Co., Ltd.
Product Introduction 1. Slide up or down on the dial interface to switch the dial display.
2. Slide left or right on the dial interface sliding operation to switch to the shortcut function display, which has the day's movement data, sleep detection, watch information, function menu, etc. Introduction To the Connection between Watch and Mobile Phone 1. Download and install APP (H Band) Scan the QR code on the box or the built-in QR code on the watch via the mobile browser program to download. Downloading needs WIFI network or data traffic.
(Figure 1) (Figure 3) (Figure 2) (Figure 4)
(Figure 5) Important: If the Apple mobile phone is not used for a long time (2 hours), in standby or hibernation (in a state of blank screen), H Band may be cleaned by the Apple's IOS system. When the connection of the APP and a watch is in the off state, the APP function will not be able to use. Open the APP again, it will automatically reconnect on watch.
Watch Function Introduction 1. Heart Rate Find the Heart Rate function in the Function Menu interface, click the Heart Rate icon to open and start the heart rate test. The test lasts for 60 seconds and then the screen will automatically turn off after the test. Before the test, please remain sitting still, do not wear the watch too tight or too loose for ensuring data accuracy. 2. Multisport a. Find the Multisport function in the function menu interface, click the multisport icon to enter the sport mode.
3. Message This function can be set in the APP settings, when set it to "on", mobile phone received the application (calls, text messages, QQ, WeChat, Facebook, twitter, Linkedlh, whatsApp, Line, lnstagram, snapchat, skype, Gmail, other, etc.) when the messages are pushed, the watch shows content (IOS need pairing; Android permission needs opening; equipment can push the normal tips). The watch only can store 3 messages at most. 4.
7. Time Countdown Find the Time Countdown function in the Function Menu interface, click to open, and you can set the hours, minutes and seconds to count down. After setting the time, click Start to return to the Function Menu. The countdown will continue in the background. When the countdown is completed, there will add the pop-up window and vibrates to remind. 8.
2、Alarm Clock Setting Open "H Band"-> My-> My device-> Alarm Reminder-> click the upper right corner '+', set the time and date of the reminder (if you set a Repeat Alarm, select the Repeat Time)-> click the top right Angle "√". The setup is OK. 3、Sedentariness setting Open "H Band" --> My--> My equipment--> Sedentariness reminder--> turn on --> click to enter the setting page (set the start and end time as well as sedentariness judging interval) --> save. The default is 14:00 p.m.-18:00 p.m.
6、Binding equipment Open "H Band" --> My--> My equipment --> Binding equipment --> turn on. After unlocking this function, when the watch syncs the data to APP, APP shall save the data locally (if the user logs in without using any account) or upload to cloud (in case the user logs with certain account).
9、Passwords resetting Open "H Band" --> My --> My equipment --> Reset the device password. User can set up the connection password as needed, after setting up the connection password, the password is required when connecting the mobile phone to the wristband. The initial passwords is 0000, which can be reset by the user. If you forgot the password, keep long press for 6s on the standby interface to clear the password, and the user can connect the mobile phone to the wristband without the password.
APPs, they may interact with each other and further affect the connection between watch and mobile phone. In case the mobile phone displays access application, please click "Yes" to avoid you failing to receive notification messages due to access limitation. Some Andriod phones may close the mobile APP mistakenly when cleaning up application programs, therefore please always keep the APP running in the background.
3. Insufficient service time The battery may not be fully charged, please maintain adequate charging time (no less than two hours) Please check if the screen-on and screen luminance time last too long. Please check if motor mode in on for a long time. 4. Bluetooth connection failure Please restart the watch/mobile phone; Please turn off mobile phone Bluetooth and then turn on again for reconnection; 5.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
