TWS bluetooth headset AirBuds 1/AirBuds 2
Product Overview Multifunctional Area Microphone Charging Port Indication of LED Device Connectivity First Pairing 1. Open the cover and the wireless earphones will automatically turn on. Then entering the pairing state, the red and blue indicator lights on the right earphone will flash alternately and quickly.
2. Turn on the Bluetooth on the device, select "AirBuds 1", click and connect. The voice "Connected" represents successful pairing. AirBuds 1 Note: The above is the first pairing method. In subsequent use, the earphones will automatically turn on and connect after being taken out from the earphone box. Wearing Method Two earphones are transmitted synchronously via Bluetooth, or you can also use one earphone.
Operation Method L Airbud R Airbud Play /Pause Click once Click once Previous Click twice / Next / Click twice Volume+ / Long press Volume- Long press / Answer Click twice Click twice Ring off Click twice Click twice Reject Long press for 2 seconds Long press for 2 seconds Voice Assistant Click 3 times Click 3 times Enter the pairing state Click 5 times Click 5 times About the charging box The charging box can be charged through the Type-C interface, the light flashes when c
Specifications Model: AirBuds 1 Bluetooth Version: 5.0 Battery Type: Li-ion Ploymer(3.7V,55mAh) Bluetooth Frequency: 2.402GHz-2.480GHz Bluetooth Trasmitted Modulation: GFSK, π/4 DQPSK, 8DPSK Dynamic Driver: 8.
Answers for common questions (1) Bluetooth headset cannot be turned on. Reason: The battery of the Bluetooth headset is low or dead. Solution: Put the earphones in the charging case, close the cover and charge them for more than 1 hour before turning on the earphones. (2) The phone cannot search for the Bluetooth earphones. Reason: 1. The Bluetooth earphones are not in the power-on pairing state. Reason: 2. There is a setting problem with the phone’s Bluetooth. Solution: 1.
Solution: 3. Please make sure that the mobile phone and earphones are used within 10 meters, meanwhile there are no obstacles. (4) The earphone cannot convey the voice or the voice is very low. Reason: 1. The Bluetooth headset is too far away from the mouth. Reason: 2.The Bluetooth microphone hole is blocked or water has entered. Solution: 1. The Bluetooth headset should be worn on the ear for normal use. Solution: 2. Remove the blockage of the microphone hole or prevent water from entering it.
(6) The headset is not disconnected after closing the earphones box. Reason: 1. The charging box is completely out of power. Reason: 2. If the headset is not put in the box correctly, it will cause abnormal communication between the headset and the base. Reason: 3. The charging box is damaged. Solution: 1. Charge the charging box Solution: 2. Reopen the cover of the charging box, take out the earphones from it, and then put the earphones in the box correctly.
Attention - Please do not disassemble this product by yourself. - Please use standard charging cable and adapter to avoid damage and accidents. - Please aviod using corrosive cleaning detergent to clean this product. - Plase avoid product usage in the rain and keep away from heating or fire. Maintenance - Please follow the following suggestions to prolong product working life. - Keep product dry and don’t put in damp places in case of affecting internal circuit.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
