Instructions / Assembly

3
Before proceeding, make certain that you
understand the IMPORTANT INFORMATION
section of this manual. This instruction manual
contains important information necessary for the
proper assembly and safe use of the appliance.
Read and follow all warnings and instructions
before assembling and using the appliance.
Hazardous re or explosion may result if
instructions are ignored.
It is the consumer’s responsibility to see that
the BLACKSTONE Single Burner Rec Stove is
properly assembled, installed, and maintained.
Failure to follow the instructions in this manual
could result in bodily injury and/or property
damage.
FOR YOUR SAFETY IF YOU SMELL GAS:
1. Turn off gas supply at tank.
2. Extinguish all open ames; do not operate
any electrical appliances.
3. Ventilate the area.
4. Check for leaks as detailed in this manual.
PRECAUTIONS:
1. Leak test all connections after each tank rell.
2. Never check for leaks with a match or open
ame.
3. Do not store gasoline or other ammable
vapors and liquids in the vicinity of this or any
other appliance.
4. Any LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
5. Do not store a spare LP gas cylinder under or
near this appliance.
6. Never ll the cylinder beyond 80 percent full.
7. If the information in the above two statements
is not followed exactly, a re causing death or
serious injury may occur.
8. Do not operate BLACKSTONE Single Burner
Rec Stove any closer than 36 inches from
any combustible construction, including walls
and ceilings. Never use indoors.
9. Do not use this appliance under overhead
combustible surfaces.
10. The regulator used in this unit is ZHENDAR
T3. If this regulator fails, it must be replaced
with the exact model and must only be
replaced by a professionally licensed,
authorized dealer.
11. Perform a visual inspection the gas path,
from the tank connection through to the
element orices for any breaks, leaks, cracks
or intrusions. Begin at the tank connection
and continue to the connection with the
metal piping behind the temperature dial
cover. Visually inspect the knob mechanism
for similar defects. Follow the metal piping
behind the temperature dials to the elements.
Look for abnormalities or cracks on the
element or orices at the center of the grill
box. Please contact customer service with
any questions or concerns.