Instructions / Assembly

13
ASSEMBLY:
Please read all instructions thoroughly before
proceeding. Find a large, clean area in which to
assemble your BLACKSTONE Single Burner
Rec Stove.
Step 1
Take out the main body carefully, pull out the
upper legs from right and left side, you can hear
a click when the legs are opened fully.
Step 3
Flip the assembled body over onto the legs,
make sure it is stable. If it is unstable adjust the
height of the legs until it is stable.
Step 2
Insert the lower feet into the upper legs. Adjust
the height by the markings on the lower feet and
then tighten the thumb screws when you have
the feet adjusted to the height you want.
NOTICE: Make sure all the plastic protection is
removed before assembling
The manufacturer has made every effort to
eliminate any sharp edges. However, you
should handle all components with care to
avoid accidental injury. No tool are required
for assembly.