User manual

Blackrock Microsystems CereStim R96 - User Manual
Rev. 1.00 ® Page vii
LB-0432
System Specifications
Model Name
CereStim R96
Number of Output
Channels
96
Number of Current
Modules
16
Type of Protection
Class II
Degree of Protection
Type BF Applied Part
Output Current
1-215 µA, adjustable in 1 µA increments
Maximum Output Voltage
±4.7V to ±9.5V, adjustable in 0.6V increments
Train Duration
194µs-66,845,700µs (0.000194 – 66.8 seconds)
1-255 pulses/train
Pulse Duration
141µs – 196,605µs (0.000141 – 0.196605 seconds)
Anodic Pulse Duration: 44-65,535µs/phase
Cathodic Pulse Duration: 44-65,535µs/phase
Adjustable in 1µs increments
Recommended Electrode
Impedance
<100 kΩ
PC Hardware Interface
USB A-B cable
Stim Manager PC Software
Compatibility
Windows XP (32-bit), Windows 7 (32-bit or 64-bit)
Analog Resolution
12 bits
Slew Rate
550 V/µs
External Power Supply
PMP15M-13 Protek Power Supply
AC Input: 100-240Vac, 0.5-0.3A, 50-60Hz (The system
was only evaluated to 120V, 60Hz)
DC Output: 15V, 1A MAX
Emergency Off Switch
¼” Mono Phone Plug
Normally Closed Switch with < 10Ω on resistance
recommended.
CereStim R96 Cable
Connectors
40 pin shrouded header; 2.54mm pitch
Manufacturer: Assman Electronics/AWH40G-0222-T-R
Monitor Connector
10 pin dual row header; 2.56mm pitch
Manufacturer: Samtec/SSQ-110-01-G-D
IPX Rating
Ordinary Equipment, Not Fluid Resistant, IP20
Operating Environment
10˚C to 40˚C, 10 to 85% R.H. (non-condensing)
Storage/Transportation
Environment
-15˚C to 60˚C, 10 to 85% R.H. (non-condensing), 500 to
1060 hPA