User manual

Blackrock Microsystems CereStim R96 - User Manual
Rev. 1.00 ® Page 15
LB-0432
Appendix A:
Observed Current at Increasing Output Vmax
Appendix A provides indications for the amount of output current (µA) that is observed at each
output Vmax voltage for either 99 kΩ or 49.9 kΩ electrode impedances.
The figures below show the observed output current (µA) measured from the CereStim R96
electrode outputs for both the Cathodic and Anodic phases. These measurements are based on a
set of input current values (µA) that were entered into the Stim Manager software. CereStim R96
output measurements were taken at each Output Vmax using both 99 kΩ and 49.9 kΩ electrode
impedances.
99 kΩ Electrode Impedances