User manual

Stim Switch User Manual

Rev. 2.00 ® Page 1

LB-0357

1 System Overview

The Stim Switch provides unprecedented electrode-switching control for neural stimulation

applications by enabling high-quality neural recordings immediately after stimulation. Each Stim

Switch is designed to programmatically switch between stimulation and recording for up to 128

electrodes (32 on each bank). In stimulation mode, current is directed towards a selected set of

electrode channels from an approved stimulation source. In recording mode, data from the

neural signals are recorded and stored by a data acquisition system. The figure below shows an

application overview of how a Stim Switch fits into a complete stimulation system.

1.1 Packing List

1 Stim Switch Control Module

1 Stim Switch Control Module Accessory Kit

1 Power Cord

2 Rack Mounting Ears

4 Screws

4 Rubber Mounting Feet

1 Stim Switch Software CD-ROM

1 Stim Switch Manual

1 USB A-B Cable

8 Thumbscrews

3 Stim100 Interconnection Cables

1 Stim Switch Headstage Kit

1 Headstage Housing

3 Headstage Modules (Encased in Headstage Module Housing)

3 Headstage Module Cables (50 Conductors, 3ft long)

1 NeuroPort Plug

1.2 Stim Switch Interface Systems (sold separately)

1 Stim100 System (Required)

1 NeuroPort

System (Required)

Figure 1-1: Application Overview