User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 57
nPlayServer (not included)
The N-Play experimental playback utility allows the user to load a raw data (NS5 file) previously recorded, and play
the data back to duplicate a live recording session. When playing back the raw data file, the user can filter the data,
spike sort, and record additional data files from the raw data. The Cerebus® hardware does not need to be connected
to the PC to use this utility.
Note: nPlayServer is not a part of the Central installation. To get a copy of it please contact Blackrock Microsystems
Support at [e-mail].
Figure 51 - nPlay File Control
To run follow the steps below:
1) Run the nPlayServer shortcut placed in the Blackrock Microsystems folder in Start Menu.
2) Run Central.
3) Click on Browse icon on nPlay File Control and open a raw file (NSx) file.
4) Choose whether the file should loop (optional).
5) Indicate the Play From and Play To time points (optional).
6) Press Play.
7) Alternatively, you may set Step Samples and then press Step Play button to play the number of samples indicated.