User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 55
N-Trode
The N-Trode utility is used when electrode types with multiple recording points are located on the same shank or in
the same discrete area of an electrode array.
Figure 50 - N-Trode Utility
o Before being able to use this utility N-Trode groups need to be defined in Hardware Configuration as described in N-
Trode Groups on page 39. The N-Trode groups can also be defined from within the N-Trode application window.
o nTrode: Use the drop down menu to switch between the different N-Trode groups. You can also use the arrows to flip
through the various groups.
o N-Trode Properties: This will let you define an N-Trode group, or add/remove channels on an existing N-Trode group.
o Channel Properties: This will edit all of the channels assigned to the currently selected N-Trode group.
o Hide Continuous: Checking this box will hide the continuous signal window on the bottom of the page to leave more
room for the N-Trode display boxes.
o Magnification: It changes the magnification of the pattern window by zooming in and out.
o Define/Delete/Units: Select a unit then click on Define. Hold down the <Ctrl> key and using the mouse to draw a shape
around a given cluster to define it as a unit. Repeat this process until all units are defined. To delete, select a unit and
click on Delete button.