User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 50
Digital Filter Design
This tool is used to design custom digital filters. The allowable filter types of “High Pass”, “Low Pass”, “Band
Pass”’, and “Band Reject”. This application depends on MATLAB Compiler Runtime installation. This file is
included in your Installation CD. Please contact [e-mail] if you need a copy of this file.
Figure 44 - Digital Filter Editor
The user can select one of the filter types and then select the desired frequency range. The “Filter Status” window
will display whether the filter is stable or not. The “Bode Plot” and the “Nyquist Plot” of the given filter are
displayed. Once the filter parameters are set, click on “Save” to save the digital filter. Refer to “How To” section to
learn how to create digital filter.