User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 49
 Normal: The trace will freeze as soon as the trace crosses threshold until the trace crosses the trigger level
again in which case the screen will update with the new trace.
 Single: A single trace is captured as soon as it crosses the trigger level. To capture another threshold-crossed
trace click on Single again.
o You can set the trigger lever by either entering a voltage value in the field or by sliding the trigger up and down
manually using a mouse.
o Assign a trigger delay. Note that at 0, the trigger will be placed at the very left edge of the screen and may not be
visible. Set a negative value to push the trigger point to the right.
Figure 43 - Custom Sliders
The slider has a range slider (on top) and a value slider (button). The range and values can also be manually defined
by entering numbers in the boxes below the slider.