User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 32
Serial I/O
This window displays the serial communication parameters, and allows the user to enable serial communication with
the NSP. These values cannot be changed.
Figure 27 - Serial I/O Properties
Audio
This window allows the user to set the properties of the audio outputs transmitted to other equipment connected to
the NSP.
Figure 28 - Audio Properties
o Label: A user-defined name for the specific channel.
o Track Most Recently Selected: When this box is checked the channel source will change based on whichever channel is
selected from Spike Panel, Single Neural Channel, or Raster Plot.
o Function: Choose whether to output LFP or Spike signal streams through the audio out channel. Additionally, a custom
waveform can be generated and sent out through audio output ports.
o Source: Select the channel to monitor through the analog output.