User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 29
Analog Output
This window will allow the user to set the properties of the analog outputs transmitted to other equipment connected
to the NSP.
Figure 24 - Analog Output Properties
o Label: A user-defined name for the specific channel.
o Input and Output Range: Fixed values for informational purposes.
o Track Most Recently Selected: When this box is checked the channel source will change based on whichever channel is
selected from Spike Panel, Single Neural Channel, or Raster Plot.
o Function: Choose whether to output LFP or Spike signal streams through the analog output. Additionally, a custom
waveform can be generated and sent out through analog output ports.
o Source Channel: Select the channel to monitor through the analog output.