User`s manual

Cerebus® User’s Manual
Revision 13.00 / LB-0028 Page 24
o Hardware Standby and Close: Closes Central and all associated applications. If data is being recorded a warning will
pop up with an option to stop recording prior to NSP going into “Standby” mode. The NSP must be in “Standby” mode
for firmware updates.
o Hardware Shutdown and Close: Closes Central, all its associated applications and stops the NSP. Manually turn off the
NSP power switch to shut down the system.
 The Tools menu contains functions regarding thresholding, spike-sorting and general application settings.
o Thresholding: Set the manual threshold level for all channels by an RMS multiplier or by a fixed voltage value.
Figure 19 - Thresholding Window
o Options: See below.
o Lock Unit Statistics: The statistics used for the automatic spike-sorting algorithm are adaptive over time. Selecting this
disables the adaptive part of the algorithm.
o Rebuild Spike-sorting Model: This option restarts the automatic spike-sorting function.
o Continuous Spike Sorting: Selecting this item will continuously adjust the spike-sorting statistics including the splitting
and merging of units. This is not recommended for use while recording.