Specifications

Cerebus
TM
Stim Switch Users Manual
Rev. 1.00 Page 9
LB-0265
button must be pressed after each timing cycle in order to begin timing again. This button can
also be used to manually stop the timing cycle.
Active Timer Panel (5): This panel displays the banks that are actively undergoing periodic
switching after the ‘Start Timer’ button is pressed.
Menu Options (6):
Saving and Restoring Settings: The StimComm program allows you to save current
settings to a file and restore those settings later. Settings can be saved by clicking the File
menu and selecting the Save Settings option. Previously saved settings can be restored by
selecting the Load Settings option in the File menu.
Assigning COM ports: Selecting Settings from the Options menu allows you to assign
COM ports on your machine in the StimComm program. You can determine which COM
ports are available on your system by right clicking on “My Computer” in the Start Menu and
selecting Manage -> Device Manager. In the device manager pane you should see a list of
com ports under the Port (COM & LPT) heading in the device manager. By default, the
StimComm program is set to use COM4. If you need to change the port assignment, you
can do that in the settings window. After changing the port settings, you will need to quit
and restart the StimComm program for the settings to take effect.