Specifications

Blackrock CerePlex M - Instruction for Use

Page 7 of 8

LB-0398 1.00

on. LED2 will blink on a one second interval as receiving correct clock cycle. LED3 only lights

up when the conversion of analog to digital is saturated.

4 Instruction for Assembly

1. The following instructions are for 96-channel CerePlex M. However, the 32 and 64-channel

CerePlex M are still applicable.

2. Turn off the power on the Digital Hub 128 before connecting.

3. Plug the input connector on the CerePlex M main board to the electrode termination.

4. Bend and plug the second connector on the CerePlex M to the next electrode termination.

5. Bend and plug the third connector on the CerePlex M to the next electrode termination.

6. Plug the HDMI cable to the output connector on the CerePlex M main board.

7. Plug the other end of the HDMI cable to the connector on the back of the the Digital Hub

128.

8. Make sure the connections are secured.

9. Turn on the power of the FODD for recording.

**After recording, turn off the power supply before any disconnection.

5 Warranty

Blackrock Microsystems, Inc. warrants that its products are free from defects in materials and

manufacturing for a period of one year from the date of shipment. Blackrock will, at its option,

repair or replace any product that does not comply with this warranty. This warranty is voided

by:

1. Any modification or attempted modification to the product done by anyone other than an

authorized Blackrock employee

2. Any abuse, negligent handling or misapplication of the product.

Figure 4-1: Instruction for Assembly