Specifications

Blackrock CerePlex M - Instruction for Use
Page 6 of 8
LB-0398 1.00
3 Hardware
3.1 Blackrock CerePlex M Pin-out
The CerePlex M has three different configurations which are 32-channel, 64-channel and 96-
channel. The differences can be distinguished easily be recognizing the quantity of banks on
the board. For 32-channel CerePlex M, there is only one bank, bank A. For 64-channel
CerePlex M, there are two banks, bank A and bank B, but bank B could be on either left or right
side of bank A. For 96-channel CerePlex M, there are three banks, bank A, bank B and bank C.
The input connector(s) pin-out is(are) shown in Figure 3-1.
*G=Ground, R= Reference
Figure 3-2 shows the pin-out of the output connector. The three LEDs under the board are
Power (LED1), Clock (LED2) and Error (LED3). LED1 will light up constantly after the power is
HDMI/D Pin #
Description
12
Clock+
14
Clock-
16
V-
1, 7
Ground
19
V+
9
Data+
11
Data-
3,5,6,7,
15,17,18
Reserved for
Internal use
Figure 3-1: Brighton Omnetics Input Connector Pin-Out
Figure 3-2: Brighton Omnetics Onput Connector Pin-Out