Specifications
Open Close
OS
øA
B
Others
Caution
1. Element interchange
Following is the element dimensions for the AFF and AM
series:
Since elements for the same body size has the same dimen-
sions, they are interchangeable.
However, do not interchange them easily since it can cause
various kinds of problems.
If interchanging the elements is unavoidable, replace the
product model number label, too.
2. About oil-free products
The AFF and AM series includes parts (such as resin parts,
rubber parts, and elements) that does not allow degreasing
wash. Therefore, oil-free products with all parts degreasing
washed is not available.
3. Degreasing wash
Certain parts such as the body and housing can be degreas-
ing washed. Contact SMC after confirming the specifications.
(available as Option or Made to Order)
4. Change of oil
On the AFF and AM series, no oil such as grease is applied
to parts exposed to compressed air. However, for certain
specifications, there are some parts to which oil is applied.
It is possible to change the type of applied oil (as Option or
Made to Order).
Element Dimensions
Model
Element dimensions
(Reference value)
øAB
AFF2C, AFF2B, AM150C, AM150
AMD150C, AMD150, AMH150C, AMH150
AFF4C, AFF4B, AM250C, AM250
AMD250C, AMD250, AMH250C, AMH250
AFF8C, AFF8B, AM350C, AM350
AMD350C, AMD350, AMH350C, AMH350
AFF11C, AFF11B, AM450C, AM450
AMD450C, AMD450, AMH450C, AMH450
AFF22C, AFF22B, AM550C, AM550
AMD550C, AMD550, AMH550C, AMH550
AFF37B, AM650
AMD650, AMH650
49
58
70
82
96
122
142
42
52
78
88
118
144
223
AFF75B, AM850
AMD850, AMH850
Maintenance
Caution
3. In the case of a type with auto drain
• The auto drain operates when the drainage level reaches the
top of the sight glass, and the drain will be discharged.
• When using the AFF2C to 22C, 37B, AM150C to 550C,
650 with auto drain, the drain is automatically discharged
with the knob tightened to the “S” side. Manual drain dis-
charge, however, is also possible.
<Manual operation>
A manual knob attached to the auto drain end is tightened to
the “S” side in normal operation. The drain can be discharged
by loosening it to the “O” side. (Be careful, however, if pres-
sure remains inside the filter when the drain is discharged, the
drain will blow out from the drain port.)
4. The drain exhaust parts replacement method and
necessary parts are different depending on when it
was manufactured.
Description
AM-SA003
AM-SA004
AD34PA-D
Note)
AD43PA-D
AD53PA-D
AM-SA002
Necessary parts
Manufactured
Dec. 2002 or before
[Up to manufacturing
lot No. GZ]
Manufactured
Jan. 2003 onwards
[Manufacturing lot No.
HO onwards]
Applicable
size
2C to 22C
2B to 37B
150C to 550C
150 to 650
2C to 22C
2B to 22B
150C to 550C
150 to 550
75B, 850
Drain guide
Drain cock
Ball valve set
N.O. auto drain
N.O. auto drain
N.C. auto drain
Auto drains cannot be
replaced alone since
those cannot be
assembled without
dedicated assembly
tools. The entire bowl
assembly must be
replaced. (Refer to
“How to Order Bowl
Assembly” on page
63.)
Note) Jig (AM-SA005) for replacing auto drain is necessary for the 75B or 850.
Series AM
/AFF
Specific Product Precautions 4
Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions,
and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions.
Back page 6