Specifications

Fluid
Max. operating pressure
Proof pressure
Ambient and fluid temperature
Operating cycle
∗
Operating time
Power source
Model
Air
1.0 MPa
1.5 MPa
100, 200 VAC Hz, Other
4 W
550 g
–5 to 60°C (No freezing)
1 time in a minute (Standard)
2 sec./time (Standard)
ADM200--
Power consumption
Port size
Mass
∗ If the operating cycle is twice in a minute (operating time 2 sec. x 2) operating time is 4 sec. each minute.
OUT:
3
8
IN:
3
8
,
1
2
50
60
Model/Specifications
Mounting
Warning
Piping
Piping should be done under the following
conditions in order to prevent malfunction.
For drain piping, use a pipe whose I.D. is not
less than ø5 and length not more than 5
m. Avoid riser piping.
1. Install this product after discharging the
drainage that has already accumulated in
the tank. Otherwise, it could lead to mal-
function.
2. Install this product, so that the drain port
could face downwards. Otherwise, it could
lead to malfunction.
Warning
Maintenance
If the valve becomes clogged with debris,
press the manual button to flush out the deb-
ris. Otherwise, it could lead to malfunction.
Caution
Provide a stop valve before the ADM200 to
facilitate maintenance and inspection.
Caution
03ADM200
1
2 sec/min (1 time/min) /3.7 to 37 kW
4 sec/min (2 times/min) /37 to 75 kW
6 sec/min (3 times/min) /75 to 110 kW
8 sec/min (4 times/min) /220 to 370 kW
Nil
6
8
4
Operating time/Applicable compressor
OUTINSymbol
04
03
Port size
3
8
3
8
1
2
3
8
100 VAC Hz
1
3
4
5
6
7
2
Voltage
50
60
200 VAC Hz
50
60
240 VAC Hz
50
60
110 VAC Hz
50
60
220 VAC Hz
50
60
24 VDC
12 VDC
Reliably discharges even highly
viscous drain
• Highly resistant to dust and highly
viscous drain, the valve opens and
closes reliably to discharge the drain.
High drain discharge capacity
• With a large discharge port, a large
amount of drain can be discharged in
a single operation.
• Elimination of residual drain inside
the tank and pipes prevents the gen-
eration of foreign matter such as
dried rust or drain, which could ad-
versely affect the equipment located
on the outlet side.
Low power consumption: 4 W
• A long pipe can also be connected to
the discharge port.
• Can be connected directly to a com-
pressor.
Related Products:
Motor Operated Auto Drain
Series ADM200
How to Order
Rc
NPT
G
Nil
N
F
Thread type
Be sure to read before handling.
Refer to back pages 1 and 2 for Safety Instructions, “Precautions
for Handling Pneumatic Devices” (M-03-E3A) for Common Precau-
tions.
Specific Product Precautions
75