Specifications

Construction
Max. Air Flow
Note) Sight glass is indicated in the figure above for easy
understanding of parts, however mounting position is
different.
Refer to dimensions on pages 14-20-6 to 7 for details.
AMG150 to AMG650
AMG850
Component Parts
Replacement Parts
Model Selection
Select the model in accordance with the following procedure taking
the inlet pressure and max. air flow into consideration.
(Example) Inlet pressure: 0.6 MPa
Maximum air flow rate: 5 m
3
/min (ANR)
1. Select the point of contact A of inlet pressure and max. air capacity
in the graph.
2. AMG650 is obtained when the max. flow line is above the point of
intersection A in the graph.
Note) Make sure to select a model that has the maximum
flow rate line above the obtained intersecting point.
With a model that has the maximum flow rate line
below the obtained intersecting point, the flow rate will
be exceeded, thus leading to a problem such as being
unable to satisfy the specifications.
No.
w
e
q
Description
Aluminum die-casted
∗
Aluminum die-casted
Material Note
Tempered glass
Chrome treated
Epoxy coating on inner surface
Housing
Body
Sight glass
∗ AMG850 is aluminum casted.
No.
r
Description Material
Resin
Others
Element
assembly
AMG150
AMG-EL150
AMG250
AMG-EL250
AMG350
AMG-EL350
AMG450
Model
AMG-EL450
AMG550
AMG-EL550
AMG650
AMG-EL650
AMG850
AMG-EL850
∗ Element assembly: With gasket and O-ring
Replacement Parts
Note) Refer to page 14-20-59 for “How to Order Bowl Assembly”.
Max. air flow rate (m
3
/min (ANR))
Inlet pressure (MPa)
14-20-5
Water Separator Series AMG
HA
AT
ID
AMG
AFF
AM
Misc.