Instruction manual

Installation
7
Connect the included SuperSpeed USB 3.0 cable to
UltraStudio Pro and to your computer.
Connect the professional breakout cable to UltraStudio Pro.
Connecting UltraStudio Pro
1. Connect the included power supply to UltraStudio Pro. Switch on the power.
2. Use the included SuperSpeed USB 3.0 cable to connect UltraStudio Pro directly to a dedicated
USB 3.0 port on your computer.
3. If UltraStudio Pro software has previously been installed and offers to update the firmware, click
Update to run the update. When the firmware update is finished, the onscreen instructions will
prompt you to power the UltraStudio Pro off and on.
UltraStudio Pro is now ready for use. The professional breakout cable can be connected to UltraStudio Pro
at any time using the multi-pin connector. The connection diagrams toward the end of this manual show
how to connect UltraStudio Pro to many kinds of video equipment.