Instruction manual

72
Installing Blackmagic Teranex Software
Updating the Teranex Processor Software
Occasionally, the internal software in your Teranex Processor will need to be updated. Updates to
internal software can provide new features, bug fixes, compatibility with new hardware, and support
for new formats.
After you have installed the latest software on your Mac OS X or Windows computer using the instructions
on the previous page, follow the steps below to update the internal software:
Step 1. Connect your computer to the Teranex processor via USB.
Step 2. Launch the Blackmagic Teranex Setup utility. Any Teranex processors connected to your
network will automatically be displayed.
Step 3. Select the Teranex Processor that is connected via USB. The USB connection icon will be
displayed next to the Teranex Processor name. Click the round setup icon below the processor’s
name to establish a connection.
Step 4. The utility will inform you if an update is required. If an update is required, click the Update
button and the software will install. Make sure you don't unplug the Teranex Processor while
the update is in progress.
Step 5. Click the Close button when the update is finished and disconnect your USB cable.
After connecting your Teranex via USB and clicking on the
setup icon under your Teranex Processor's name, Teranex
Setup will automatically check if the unit needs an update. If
an update is required, a window will appear prompting you to
update your Teranex.
Click on the Update button to install the software.