Instruction manual

71
Installing Blackmagic Teranex Software
Installing Blackmagic Teranex Software on Windows
If a "Blackmagic Teranex Installer” has been previously installed on your computer for an earlier version
of software, you must uninstall the application before attempting to install the new version.
Step 1. Ensure you have the very latest software. Visit www.blackmagicdesign.com/support. Download
the latest Teranex software update and unzip the windows MSI file.
Step 2. Double click the MSI filename to launch the installer program. Click NEXT to start the
Blackmagic Teranex Setup Wizard. After reading the Blackmagic Teranex Information page,
click NEXT. Accept the End User License Agreement and click NEXT.
Step 3. Click INSTALL on the "Ready to install Blackmagic Teranex” page. The “Installing Blackmagic
Teranex” page with Status bar will appear and installation of the software will begin. An alert
will appear asking your permission to install software on the computer. Click YES to continue.
Step 4. Click FINISH on the “Completed the Blackmagic Teranex Setup Wizard” page.
Step 5. Restart your computer to complete the installation.
Once the computer has restarted, all the Blackmagic Teranex software applications will be installed and
can be accessed from Start > Programs > Blackmagic Design.
You'll now need to check if your Teranex processor requires updating using the Blackmagic Teranex Setup
utility, which is located in the Blackmagic Teranex folder in Start > All Programs > Blackmagic Design.
Refer to the 'Updating the Teranex Processor Software' section on the next page for more instructions.
The Blackmagic Design folder also contains Blackmagic Media Express, which allows the Teranex 2D
and 3D Processors to capture and playback video via a Thunderbolt connection. Blackmagic UltraScope
software allows you to perform waveform monitoring using the Thunderbolt connection.
Launch the Blackmagic Teranex Installer and follow
the install prompts.