Instruction manual

Getting Started
7
Applying Settings using the Control Panel
Use the control panel LCD, soft menu buttons and rotary knob to navigate through the menus and make
your selections. For example, when setting timecode, the cursor is moved forward or backward through
the timecode register using the soft menu buttons. Timecode digits are adjusted using the rotary knob.
Pressing the rotary knob returns parameters to their default value.
Program your conversion settings by pressing the buttons on the control panel. Buttons are illuminated
so you can quickly check the status of your audio and video connections and output settings.
Explore the Teranex menus and experiment with conversion workflows. You'll find examples of common
workflows on the following pages.
Below is an overview of control panel features.
Use the control panel LCD, soft menu buttons and rotary knob
to navigate the menus and apply your settings.
IN
OUT
SDI
VIDEO
VIDEO
HDMI
ANLG
AUDIO
AUDIO
EMBED
AES
ANLG
FORMAT
FORMAT
486
720
2K
1080
576
1080
FRAME
FRAME
P
I
PSF
MENU
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS AUDIO STATUS
SYSTEM STATUS
PRESETS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
Main Menu
Audio Reference
System
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1. IN - Press to display current input settings.
2. OUT - Press to display and change current output settings.
3. VIDEO - Press to select video input type, and displays
all video outputs.
4. AUDIO - Press to select audio input type, and displays
available audio outputs.
5. FORMAT - Press to select the video output format,
and displays the video input format.
6. FRAME - Press to select the video output frame type,
and dIsplays video input frame type.
7. RATE - Displays video input frame rate as frames or
fields per second. Press to select video output rate.
8. ASPECT - Press to select video input and output
aspect ratio settings.
9. SOFT MENU BUTTONS - Press to navigate the
LCD menus and apply settings.
10. LCD - Displays the video input and output, and
menu settings.
11. ROTARY KNOB - Turn to adjust menu settings.
Press to return settings to default.
12. MENU - Press to toggle the LCD between main
menu and live video. MENU 1 and MENU 2 are
programmable as page shortcuts.
13. VIDEO - Press to activate video proc amp settings.
14. PRESETS - Press to save or recall custom system
configurations.
15. AUDIO STATUS - Displays available input and output
audio channels.
16. SYSTEM STATUS - Displays input, output and control
status information.
17. PANEL LOCK - Press and hold to lock the control panel
to prevent accidental changes. Press and hold to unlock.
18. REM LOCK - Press and hold to prevent a remote
device from controlling the Teranex via Ethernet.
Press and hold to unlock.
19. POWER - Press to power ON. Press and hold to
power OFF.
1
2 9 9 16 18 19
3 4 5 6 7 8 10 11 12 13 14 15 17
IN
OUT
SDI
VIDEO
VIDEO
HDMI
ANLG
AUDIO
AUDIO
EMBED
AES
ANLG
FORMAT
FORMAT
486
720
2K
1080
576
1080
FRAME
FRAME
P
I
PSF
MENU
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS AUDIO STATUS
SYSTEM STATUS
PRESETS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
Main Menu
Audio Reference
System
Setup
3D
Ancillary
Data
Noise
Reduction
Video