Instruction manual

Installing Blackmagic Teranex Software
67
Installing Blackmagic Teranex Software on Mac OS X
The Teranex installer ensures your computer has all the drivers and software needed to get the most out
of your Teranex Processor. It's a good practice to regularly check the Blackmagic website for any updates
to the Teranex installer, or for any new internal software using the Teranex Utility via USB.
To install your Teranex software for the first time, or if you have just downloaded an updated installer
from the Blackmagic website:
Step 1. Open the “Blackmagic Teranex” folder from the disc or downloaded disk image and launch
the “Blackmagic Teranex Installer”.
Step 2. Click Continue. Agree. Install buttons and the software will be installed on your system.
Step 3. Now restart your computer to enable the new software drivers.
On Mac OS X, all the files needed to run your Teranex Processor will be installed into a folder called
Blackmagic Teranex in the Applications folder. The folder contains the Teranex Utility which allows you
to update the internal software via USB. This instruction manual is also in this folder.
The Applications folder contains Blackmagic Media Express which allows your Teranex 2D or 3D
Processor to capture and playback video when connected to a computer via Thunderbolt. Alternatively,
the Thunderbolt connection allows you to perform waveform monitoring of your video input using the
Blackmagic UltraScope software.
Teranex Utility
Launch the Blackmagic Teranex Installer and follow the
install prompts
Installing Blackmagic Teranex Software