Instruction manual

Capture and Playback

Adobe

Premiere Pro

For this example, the converted output from the Teranex will be 1080i50 and we will be capturing from a

non-controllable device.

Setting Up

Step 1. Launch Premiere Pro CC. In the Welcome window select Create New/New Project. A window

will open containing project settings.

Step 2. Name your project. Choose the location for your project by clicking Browse and selecting your

desired folder.

Step 3. If your graphics card is supported by Premiere Pro CC's Mercury Playback Engine, the Renderer

option will be available and you should switch it to Mercury Playback Engine GPU Acceleration.

Step 4. Set the "Capture Format" to "Blackmagic Capture" and click on the Settings button. Set "Video

Standard" to 1080i50 and select a "Video Format" according to your requirements. Click OK.

Capture

Step 1. Select File > Capture [F5]

Step 2. Click the red record button [G] to begin capture.

Step 3. Click the stop button [S] to stop capture.

Playback

Step 1. Playback settings need to be selected each time a new project is created. Go to Preferences

> Playback and under "Video Device," enable the checkbox for "Blackmagic Playback" and

ensure the other checkboxes are empty.

Step 2. For audio playback, select "Blackmagic Playback" from the "Audio Device" dropdown menu.

Step 3. Click on a clip and you should now see the image on your Teranex Processor.

Set preferences for Playback.

Premiere Pro

CC (2014)