Instruction manual

Teranex Processor Settings
45
Video Formats Supported
The 2D to 3D feature supports SD and HD inputs, and converts to an HD output. The 3D Convert and 3D
Camera Align features support all 3D-centric video formats that are supported by the Teranex 3D. For
3D Align, both input streams, left and right, must be of the same format and frame rate. The following
video format conversions are supported:
 Pass-through, where the output format is the same as the input format.
 1080i 50/59.94 to 1080p/sf 23.98/24/25/29.97
 1080p/sf 23.98/24/25/29.97 to 1080i 50/59.94
 1080i 50/59.94 to 1080i 59.94/50 (Frame Rate Conversion)
 1080i 50/59.94 to 720p 50/59.94
 720p 50/59.94 to 1080i 50/59.94
 720p 50/59.94 to 720p 59.94/50 (Frame Rate Conversion)
Independent Channel Processing
Image alignment for each video channel is possible via the Camera Align application. Proc amp, timecode
and noise reduction settings are applied simultaneously to both video streams.
Audio Support
Embedded, AES and Analog audio is supported for “Channel A”. When selecting EMBED, the embedded
audio on input A will be processed and outputted via output A.
Ancillary Data Support
Ancillary data such as timecode and AFD is supported on input A and output A only.
External Reference
The output streams may be synchronized to either Input A or to an external reference of Blackburst or
Tri-level sync supplied to the REF connector. Select the type of reference, Internal or External, using
Home>Reference>Type.
When using an external reference, the user interface controls both channel A and B, enabling both
output streams to remain pixel locked, even when adjusted relative to the selected reference source.