Instruction manual

Teranex Processor Settings
44
Zoom Menu
The Camera Align Zoom menu permits you to zoom the left and right images in the horizontal and
vertical directions independently, or in both directions simultaneously.
 A negative parameter indicates zooming OUT on the image, while a positive parameter
indicates zooming IN on the image.
 Pressing “Both” will link the horizontal and vertical zoom parameters, which will maintain the
correct aspect ratio while zooming.
 Selecting “Both Eyes” will simultaneously zoom both eyes of the stereoscopic image by the
same amount.
Trim Menu
The Camera Align Trim menu permits you to trim the image in the horizontal and vertical directions
independently or in both directions simultaneously.
 The range of the trim is dependent on the video format in use.
 In the horizontal direction, the left and right edges will be trimmed simultaneously.
 In the vertical direction, the top and bottom edges will be trimmed simultaneously.
 Pressing “Both” will link the horizontal and vertical trim parameters, which will maintain the
correct aspect ratio while trimming.
 Selecting “Both Eyes” will allow you to simultaneously trim both eyes of a stereoscopic
image by the same amount.
Connections and Other Important Information for 3D Modes
Let’s detail some of the connections and ancillary data handling that will affect your workflows.
Video Connections
Stereoscopic left and right video inputs should be connected to SDI inputs A and B respectively. Similarly,
left and right processed outputs will be available at SDI outputs A and B respectively. The HDMI input
and output connections support full frame Frame Packed signals.
Trim
0
Both Eyes
Right Eye
Left Eye
Both
Reset
All
Vertical
Horizontal
Trim Menu>Horizontal
Trim
0
Both Eyes
Right Eye
Left Eye
Both
Reset
All
Vertical
Horizontal
Trim Menu>Vertical
Trim
0
Both Eyes
Right Eye
Left Eye
Both
Reset
All
Vertical
Horizontal
Trim Menu>Both
Camera Align
Trim
Zoom
Flip
Reset
All
Rotation
Position
Camera Align Menu>Zoom
Zoom
0
Both EyesBoth
Right Eye
Left Eye
Reset
All
Vertical
Horizontal
Zoom Menu>Horizontal
Zoom
0
Both EyesBoth
Right Eye
Left Eye
Reset
All
Vertical
Horizontal
Zoom Menu>Vertical
Zoom
0
Both Eyes
Right Eye
Left Eye
Both
Reset
All
Vertical
Horizontal
Zoom Menu>Both
Camera Align
Trim
Zoom
Flip
Reset
All
Rotation
Position
Camera Align Menu>Trim