Instruction manual

Teranex Processor Settings
43
Toe-In Adjustment - Y Axis
The Toe-in Y adjustment provides image rotation on the Y axis.
 The range of adjustment on the Y axis is -8 to +8 degrees, with a granularity of 0.2 degrees.
The default setting is 0.
Flip Menu
The Camera Align Flip menu permits you to flip an incoming image horizontally, vertically or in both
dimensions simultaneously. This feature may be used to compensate for inverted cameras mounted in
3D camera rigs that use mirrors or prisms.
 The Left and Right Eye signals may be flipped independently.
 Selecting the “Both Eyes” button in the Flip menu will simultaneously flip both eyes.
 Pressing Reset All will set Flip to OFF.
Original Image Toe-in Y-Axis
Both
Vertical
Horizontal
Off
Flip
Both Eyes
Right Eye
Left Eye
Reset
All
Flip
Flip Menu>Left Eye /
Horizontal
Original Image Flipped Horizontally Flipped Vertically
Flipped Both H & V
Camera Align
Trim
Zoom
Flip
Reset
All
Rotation
Position
Camera Align>Rotation
Rotation
0.0
Both Eyes
Right Eye
Left Eye
Reset
All
Toe-in Y
Tilt X
Roll Z
Rotation Menu>Toe In Y Axis
Camera Align
Trim
Zoom
Flip
Reset
All
Rotation
Position
Camera Align>Flip