Instruction manual

Teranex Processor Settings
41
Intensity
The Intensity selection will not be available until 2D to 3D has been selected in the 3D Mode menu.
The Intensity setting allows you to control the overall amount of the 3D effect.
 The range of adjustment is -40 (image is in front of the screen) to +40 (image is behind the
screen). The default setting is +15. A setting of 0 provides a flat, 2D output image.
Depth
The Depth selection will not be available until 2D to 3D has been selected in the 3D Mode menu.
The Depth setting pushes the overall image deeper. This can add to the 3D effect but in most cases
should be left at the default value.
 The range of adjustment is -12 to +12. The default setting is 0.
Camera Align
The Camera Align button will be enabled only when you select 3D Align in the 3D Mode menu. The
Camera Alignment application performs a variety of processing adjustments to a stereoscopic stream,
including image zoom, flip, horizontal & vertical positioning and axial rotation adjustment. Adjustments
may be made to the individual eyes or you may link the left and right eye images and simultaneously
adjust both eyes of the stereoscopic image by the same amount.
 Default Settings – As with other menus in the Teranex Processors, you may push the rotary
encoder to return the current parameter to its default setting. Use the “Reset All” menu
button to return all controls in the current menu to their default settings.
Position Menu
The Position Menu provides for horizontal and vertical position adjustment of each image. You may
individually select the left or right eyes, or adjust both eyes simultaneously.
 The range of values shown in the positioning dial will change depending on the output
format you have chosen; however, the range will always be -50% to +50% of the picture size,
horizontally and vertically. For 1080 outputs, the range of positioning is -959 to +959 pixels
horizontally and -539 to +539 lines vertically. For 720 outputs, the range is-639 to +639 pixels
and -359 to +359 lines.
– A positive horizontal value indicates a shift to the right.
– A negative horizontal value indicates a shift to the left.
– A positive vertical value indicates a shift upward.
– A negative vertical value indicates a shift downward.
3D Align
2D to 3D
Convert
Off
3D
Camera
Align
Depth
Intensity
Output
Input
3D Mode
2D to 3D mode must be
active to adjust Intensity
and Depth.
Intensity
+15
Camera
Align
Depth
Intensity
Output
Input
3D Mode
3D Menu>2D to 3D>Intensity
3D
0
Camera
Align
Depth
Intensity
Output
Input
3D Mode
3D Menu>2D to 3D>Depth
Camera Align
Trim
Zoom
Flip
Reset
All
Rotation
Position
Camera Align Menu
0
Both Eyes
Right Eye
Left Eye
Reset
All
Vertical
Horizontal Position
Camera Align >Left Eye
Horizontal
0
Both Eyes
Right Eye
Left Eye
Reset
All
Vertical
Horizontal Position
Camera Align >Left Eye
Vertical
3D Menu>Camera Align
3D Align
2D to 3D
Convert
Off
3D
Camera
Align
Depth
Intensity
Output
Input
3D Mode