Instruction manual

Teranex Processor Settings
38
Reference Signal Compatibility Chart:
If External reference is selected and a valid reference signal is detected, the REF Status LED on the front
panel will illuminate. If the external reference is removed or lost, the processor will go into a free run
condition until reference is restored.
Pixel Offset
If External has been selected and a valid reference is present, this control will adjust the Pixel timing of
the output relative to the supplied external reference.
 The Range is determined by the current output format selection.
Line Offset
If External has been selected and a valid reference is present, this control will adjust the Line timing of
the output relative to the supplied external reference.
 The Range is determined by the current output format selection.
Output Format and Frame Rate Reference Signal
UHD 2160p50 Blackburst 50 or Tri-level Interlaced 50 (TRI-I) or
Tri-level Progressive 50 (TRI-P)
UHD 2160p59.94 Blackburst 59.94 or Tri-level Interlaced 59.94
(TRI-I) or Tri-level Progressive 59.94 (TRI-P)
Pixel Offset
0
Type
Pixel
Offset
Line
Offset
Reference Menu>Pixel Offset
Line Offset
0
Type
Pixel
Offset
Line
Offset
Reference Menu>Line Offset
Main Menu
Audio Reference
3D
Ancillary
Data
Noise
Reduction
System
Setup
Video
Main Menu>Reference