Instruction manual

Teranex Processor Settings
31
Service 2 Language
Service 2 Language is used to select the language for that Service in CEA-708 closed captions.
 The language choices are:
– English
– French
– German
– Italian
– Spanish
 The default language is English.
Timecode Menu Settings
Teranex lets you send incoming timecode to the output, strip incoming timecode completely or generate
new timecode. Similar to broadcast decks, you can select the desired timecode mode, such as Input
Regen and Jam Sync, or set specific timecode data.
To enable timecode processing, go to Main Menu>Ancillary Data>Timecode and choose your desired
timecode mode.
Timecode Generator
The Timecode Generator menu lets you choose from four available timecode modes, or disable manual
timecode processing.
Off No timecode data will be inserted into the output video (default).
Input Select Input mode to feed the input timecode directly to the output. This is useful if you
want to preserve your source timecode and your input and output frame rates are the same.
It’s important to make sure that the Drop Frame mode in the timecode Setup menu is set
to Auto to ensure the output timecode will match the input timecode.
Please note, if you want to ensure the output timecode matches your input timecode, do
not use an external reference. The external reference can cause a dropped or duplicated
frame in the output, which will affect your timecode count.
To set the Reference menu to Input, go to Main Menu>Setup>Reference and select Input.
Ancillary Data
Video
Index
Timecode
Closed
Caption
Ancillary Data
Menu>Closed Caption
Spanish
Italian
German
French
English
Select Language
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
Reset
All
Closed Caption Menu>
Service 2 Language
Ancillary Data
Video
Index
Timecode
Closed
Caption
Ancillary Data Menu>
Timecode
Jam Sync
Generate
Input Regen
Input
Off
Timecode
Start
Start
Source
NextPrev
Setup
Timecode
Generator
Set
Timecode
Timecode Menu
Jam Sync
Generate
Input Regen
Input
Off
Timecode
Start
Start
Source
NextPrev
Setup
Timecode
Generator
Set
Timecode
Timecode Generator
Menu>Input